JBL Headphones not Turning ON

The sound of music can be quite soothing, but when headphones don’t work, the experience can be frustrating. JBL headphones are known for their powerful sound. You are having a problem with your JBL headphones not turning on. When you press the power button, nothing happens. You have tried different charging cables and different sockets, but nothing seems to work. If your headphones are not turning on, there could be a few potential causes.

A few things to look for when troubleshooting these types of problems we will give you simple steps to solve this issue. You just follow these steps and get your solution.

1.Let your JBL headphones reset

If your JBL headphones are not turning on, all you need to do is reset them. To do this, hold down the Volume+ and Volume- both buttons until for 10 seconds. Afterward continue to hold the Volume buttons until you see the light flash rapidly or the power light turns on. if you tried this and this method not working so revise this step three to four times more and then you will reset your headphones. Sometimes this method is not working in one try so that’s why you should need to do this step three to four times.

2.The battery might be faulty

battery might be faulty

If your JBL headphones are not turning on, the battery might be at fault. The battery is located in the ear cup of the headphones where the power button is located and the battery is rechargeable. To test this, try charging the headphones for a full 24 hours. If they still don’t turn on, the battery might be faulty. If the battery is not charging or holding a charge, it might need to be replaced. You can purchase a new battery from JBL’s website or an authorized dealer.

3.Completely charge the battery

If your JBL headphones are not turning on, there are a few things you can do to try and fix the issue. One thing you can try is completely charging the battery. To do this, plug in the headphones to a power source and let them charge for at least two hours. If they still don’t turn on, there may be an issue with the charging cable and adapter and you may need to replace it. Sometimes you see the charging light is turned on but actually that is not charging. In this case, you need to test the performance of your JBL headphones and charging accessories. Use another charging cable and adapter.

4.By using Troubleshooting guide to Troubleshoot your JBL Headphones

If you’re having trouble with your JBL headphones, there are a few things you can do to troubleshoot them. If your headphones are fully charged and then they don’t turn on immediately, here are a few troubleshooting techniques you can try.

  • Try to hold down the power button for a few seconds.
  • Press the power button 3 times in a row now.
  • Press the power button multiple times till the LED indicator comes on.
  • Your JBL headphones are now on and will function normally.

5.Use the buttons

If you try to turn on your JBL headphones, the buttons don’t seem to be working. You’ve tried pressing them multiple times, but nothing happens. It could be a fault in the power button to do fix this fault follow the instructions below:

  • Find the power button in case of your JBL headphones. It will normally be located on your left earcup.
  • Take off the ear cushions from your ear cups in which the power button is located. These are wrapped around the earcups, and you don’t need to use any tools. You can easily remove them by hand.
  • The openings of the base will reveal the 3 screws, which can be unscrewed with a screwdriver. The earcup will disassemble, revealing the inside components.
  • On the internal side of its button, press down and place a drop of WD-40.
  • Tighten up the screws to set the ear cup back in position now.

The purpose is to resolve the loose or unresponsive power button of your JBL headphones. This trick will fix the loose or unresponsive power switch of your JBL headphones. Wait for a couple of minutes and then turn on the headphones again.


In conclusion, it appears that the JBL headphones are not turning on. This may be due to a problem with the battery, the wiring, or another component of the headphones. In this article we determine the cause of the problem so that it can be fixed. JBL headphones are a quality product and should not have this type of problem. If you face this issue, after reading this article we assure you that you will get your solution. Thanks for reading.

Related Articles: How to pair JBL headphones

Notify of
Inline Feedbacks
View all comments
Scroll to Top
Scroll to Top