JBL Flip 5 Not Turning ON

If your JBL Flip 5 speaker won’t turn on, there are a few things you can try. Your JBL Flip 5 speaker is not turning on, there may be some problems with the JBL flip 5. In this article we try our best to give you the best solutions to these problems. We hope the below methods will resolve all your issues. You tried different methods and even replaced the battery, but nothing seems to work. But we assure you that after following our methods below you will find your solution. These methods will work just for JBL flip 5 and make it workable. You just need to follow the steps below.

Reset the Flip 5

It’s not uncommon for electronics to require a reset from time to time. Sometimes all it takes is to hold down a button or two for a few seconds, and your device is up and running like new again. If you’re having trouble with your JBL Flip 5 not turning on, don’t worry – it’s likely that a simple reset will take care of the issue.

  • First, holding down the power button on the Flip 5 for about 5 seconds.
  • Then turn on JBL flip 5. You can do this by pressing on the power button. Now device in pairing mode.

Recharge The Battery

Recharge The Battery

Sometimes the battery of the JBL Flip 5 does not turn on. If this happens to you, don’t worry, there are a few things you can do to try and fix it.

  • Plug the USB-C charging cable into the speaker’s charging port.
  • The other end of the USB-C charging cable is inserted into the USB wall charger.
  • A return output of at least 1.0A and not greater than 3.0A.
  • Connect the wall outlet to the wall charger.

Check circuit board

Check circuit board

The JBL Flip 5 is a great speaker, but what happens when it doesn’t turn on? There could be many reasons why your JBL Flip 5 isn’t turning on. The reason should be in the Circuit Board because the JBL Flip 5 is an IPX7 waterproof speaker and sometimes we can use it under the water but the water can damage the circuit. If it contacts water for a long time, water can damage the circuit. If your circuit board is damaged consult a professional. When the circuit board is damaged the speaker stops working properly.


In conclusion, the JBL Flip 5 is not turning on. We have tried multiple things to get it to turn on, and in this article we gave you several methods to resolve your issues. It’s possible that there is a problem with the battery or with the charging cable, but it’s also possible that there is a more serious issue with the speaker itself. In the above methods we tried our best to give you solutions to issues you are facing. Hopefully you can solve your issues after following our methods. Thanks for reading!

Related Articles:

How To Pair JBL Flip 4
How To Connect JBL Speakers To iPhone
How To Connect JBL Speakers Together

Notify of
Inline Feedbacks
View all comments
Scroll to Top
Scroll to Top